top of page

CRASH BARRIERS

sectioned_crash.png

Sectional barrier is designed to suit your low speed applications, such as car parks, on forecourts, inside industrial warehousing complexes and around school playing fields.

untension_crash.png

Untensioned safety fencing is widely used in installations such as industrial estates and car parks, where you need more protection from larger vehicles.

Sectional Crash Barrier
sectioned_crash.png

It can be used in single units or connected together to fence off an area.

 

Specification:

Manufactured from 3mm pressed steel with bright spangled galvanised finish.

There are 2 standard types of post available manufactured from SHS tube, galvanised finish. Each post is supplied with 1 No. M12 x 90mm galvanised square neck carriage bolt for affixing rail. Floor mounted post is pre-drilled to accept 4 No. M12 anchor bolts.

Untensioned Crash Barrier
untension_crash.png
BP garage Stourbridge 1.jpg

It is designed to both protect areas from damage by passing vehicles and to smoothly re-direct traffic onto a course as near as possible parallel to the barrier if out of carrier.

 

Specification:

The corrugated mild steel beams are formed from 3mm thick material and supplied in standard lengths of 3500mm (3200mm effective). All rails come complete with a centre slot at 1600mm centres for additional posts if required.

Post are supplied either:

1) 125mm x 90mm x 5mm x 1200mm "Z" section post (for excavated foundation).

2) 127mm x 76mm RSJ post (Type P224) x 560mm or 760mm c/w base plate for bolting to concrete surface.

bottom of page